Home > Problems > Jitter Buffer Configuration

Problem: Jitter Buffer Configuration

A jitter buffer temporarily stores arriving packets in order to minimize delay variations. If packets arrive too late then they are discarded. A jitter buffer may be misconfigured and be either too large or too small.

Impact

If a jitter buffer is too small then an excessive number of packets may be discarded, which can lead to call quality degradation. If a jitter buffer is too large then the additional delay can lead to conversational difficulty.

Resolution

A typical jitter buffer configuration is 30 milliseconds to 50 milliseconds in depth. In the case of an adaptive jitter buffer then the maximum size may be set to 100-200 milliseconds. Note that if the jitter buffer size exceeds 100 milliseconds then the additional delay introduced can lead to conversational difficulty

Back To Top

Conditions of use: The material on this site is copyright VoIP Troubleshooter LLC and may be freely used but not copied or downloaded.  In making use of this site the user acknowledges that VoIP Troubleshooter LLC or Contributor has no liability for any issues or problems that may arise directly or indirectly as a result of such use.  VoIP Troubleshooter LLC and Contributor are providing this material as-is with no warranty as to correctness or completeness and do not accept any responsibility for any issues or problems of any nature whatsoever that may arise from the use of the material on this site.